Just For Fun ScaleModels

[image] #JustForFunScaleModels 1/48 HK/Eduard B-25 Straffer edition. 99 percent done. i wasn’t gonna remove the carrier film. BUT, the carrier film came off anyway after i flat coated it! 🤣

[image] ウェザリング！進捗はこちら Weathering! Here's how the progress looks.

[image] Next up. Had in Stash for a few years. A fellow 787 Capt buddy was over and saw it. Asked if I would build for his wife whose grandfather flew them in WW2. Building another Voodoo for his Dad. That my mission for next month in between flying.

[image] 🏁 1/144 FW-190 D9 in paper #JustForFunScaleModels #paperModel #kggmodel #kggFw190D9 📸🫴Palm shot! 👉

[image] Working on the 1/12 scale Bugatti Type 35 #italeri #bugatti

[video] ✨ 1/144 FW-190 A8 in paper ✂️ #JustForFunScaleModels #paperModel #kggmodel #kggFw190A8

[video] 🏗 1/144 FW-190 D9 in paper #JustForFunScaleModels #paperModel #kggmodel #kggFw190D9 👉

[image] Eduard 1-72 BF 109K-4 (Dual combo) #JFFLetterB The decals are on lots of burnishing and 24hrs later remove the cover film

[image] This is about as far as I'll get with the Takom M4A1 for the next 6 weeks, work calls. Decals applied, really liked the Takom decals, until I applied a lightly sprayed dust coat which accentuates the decal film, not had that before, we'll keep learning. Stowage painting started

[image]

[image] That’s pretty much all of the parts designed and test printed. Front hoses and siren are good to go, with pump and controls close behind. Ladders could be a little bit longer. Not 100% sure about the brass mesh over the speaker, but on the whole making good progress. #JFFLetterB

[image] #JFFLetterB the hot weather in the SE of the UK has kept me away from the bench for a while but I’ve finally finished my Miniart P-47. Not my best but I’m happy with it. I hope you like it

[video] 🏗 1/144 B-25D "Mitch the Witch" in paper #JFFLetterB #JustForFunScaleModels #paperModel #kggmodel #kggB25d How the wings came together

[image] Mmmm… forgot about the Tortoise 🐢

[image] Have you seen this from @Mirthrendir (member) it’s absolutely stunning 🤩

[image] I've never made anything like this before and it might look like there's so much on it but looking at reference photographs I could get away with even more colours, pigments and debris Couple more things to do and we might be done before end of week #JFFCancerResearch

[image] 🏗️ 1/144 B-25D "Mitch the Witch" in paper #JFFLetterB #JustForFunScaleModels #paperModel #kggmodel #kggB25d 📅 Day 20 👉

[image] MAX model (JAPAN) 1/35 M3 Scout car & WC-51

[image] The second one of the dual combo is underway Eduard 1-72 BF109K-4 Bit of cockpit work quite pleased for a tiny 1-72

[image] Great War theme here for some time to come. This Fokker and a Royal Flying Corps DH-2.

[image] 🏗 1/144 FW-190 A8 in paper #JustForFunScaleModels #paperModel #kggmodel #kggFw190A8 📅 Day 18 👉

[image] Voodoo's made it out to display case.

[image] I'm quite happy with the result I have to admit 😅

[image] Chipping and oil work on this Italeri 1/35th scale 134/1. Going well now, need to start thinking about working on the accessories and start work on the wheels soon. Exhausts need more work yet, as do a few other areas. Happy with it now though.😀😀 #JFFCancerResearch

[text] Reminders: 1. X are closing communities on 30/5 we have a new hashtag that we use with our posts from now #JustForFunScaleModels 2. #JFFLetterB closes for the montage on 30/6 after this date you can continue with the hashtag until 30/8 but no further montages will be added

[image] Markings painted

[image] My project for #JFFLetterB is drawing to a close…final touches.

[image] Eduard 1-72 BF 109K-4 #JFFLetterB WIP … I decided it would be easier to do the fuselage separately

[image] Magic Factory 1:48 F4U-1A Corsair progress Built the engine and landing gear, did some spark plug wiring to engine and brake wires for gears Wash applied and matt coated Plannin on finishing up on this project this friday #JustForFunScaleModels

[image] Going to be tackling these cheeky lads next 😬😀 #JustForFunScaleModels

[image] 🏗 1/144 FW-190 A8/D9 in paper #JustForFunScaleModels #paperModel #kggmodel #kggFw190A8 #kggFw190D9 👉 👉

[image] 🛩️ Tiny P-51 Paper Duo #JFFScaleModels #paperModel #kggmodel #kggP51B #kggP51D

[image] Airfix 1/72 TSR2 with lots of aftermarket bits.

[image] Happy with this so far. Chipping up next.🤗

[image] Eduard 1-72 BF 109K-4 (Dual combo) #JFFLetterB The second one of this 1-72 dual combo from Eduard is well on its way

[text] Remember X are closing communities on 30/5 we have a new hashtag that we use with our posts from now #JustForFunScaleModels

[image] 1/72 Regiane 2002 Ariete, Regia Aeronautica Italiana.5th build of 2026, I have to slow down, otherwise I will not have space

[image] 🏗️ 1/144 B-25D "Mitch the Witch" in paper #JFFLetterB #JustForFunScaleModels #paperModel #kggmodel #kggB25d 📅 Day 23 cont. 👉

[video] Resin tinting has worked really well for the #BlueLights. Took a whole lot more than a couple of drops of the dye to get anything like an intense enough colour. #JFFLetterB

[image] The hatch opens and closes perfectly.

[image] Morning all. Ok, this isn't mine. Dan Boone(@Dog1) just finished this. For some reason, he can't put pics up here. I'm doing it for him as his work is stellar and needs to be seen. 1/32 Revell kit. Send kudos to Dan as he did a fantastic job.

[image] Upper hull under way on the Jagdpanther…..

[image] F-82 Day3: Starts looking like a Twin 'stang with a third nose, the direction that I am aiming for is getting evident.

[image] Pre-shading the Fokker.

[image] 内装完成！！ The interior is complete！！

[image] Ok, I’m calling the fire truck finished. There will be bits and bobs to fiddle with, but I think we’re done. Really fun build with lots of entertaining stuff like the 3D print designs and special effects - of which you can find out more here: #JFFLetterB

[image] Good Morning. Ready to fight the Cylons. #JustForFunScaleModels

[image] ✨ Previous project Grumman A-6A Intruder VA-95 "Green Lizards" (1/144) #JFFScaleModels #papermodel #kggmodel #previousWorks #kggsnpa6 👉

[image] My 109E winning an Excellence Award hooray😄😄

[image] 1’st of the month so gracing the community header pic for the month of August is the magnificent Stearman PT-17 ICM kit in 1/32nd scale. From @GavicWayne